Material: ABS plastic.
Image sensor: 2 million pixel CMOS.
Infrared light: built-in 8 infrared lights.
Lens: 3.6MM HD lens.
Video mode: HD / SD( please turn it to HD status to best view).
Image resolution: 1920x1080.
Audio input: built-in MIC.
Audio output: built-in speaker.
Record: PIR motion, please manual click record if you need full day for record.
Wireless network: 2.4GZIEEE 802.11B/G/N, don't support 5Ghz wireless network!
Storage function: support Micro SD card storage, Max 64G（Product does not contain card）.
Intelligent alarm: PIR human body induction.
Rechargeable battery: 5200/10400 mAh polymer lithium battery.
Stand by Time: max 5/10months(sleep status).
Charging method: plug in the power supply.
Working environment: -10 ° C ~ 60 ° C / 20% ~ 85% (non-condensing).
Waterproof rating: IP66.
Great Cloud Service(Cloud Record, Auto Motion Video upload to cloud).
Note : This item can only support view through mobile phone.The APP MicroShare is free ,but it needs extra cost for cloud storage.If you take cloud storage,then no need to put the SD card.
- Suitable for indoor or outdoor use. Waterproof grade IP66.
- Prevent theft, robbery and vandalism in your home or business.
- Wall mount brackets and fixtures.
- Easy and quick to install - no wiring required.
- Support for local memory card storage up to 64G micro SD card.
- HD 1280 * 720P video recording, making the image clear and missing no details.
- Built-in microphone and speaker for two way intercom in the app, speaker and hear each other, perfect for taking care of you and the elderly.
-No need to connect to professional CCTV software.
-No need to set up ftp server.
Device functions introduction:
1. Low power warning:
Please use the original charger we provide.
2. PIR Alarm and video function :
When the device connect to home WiFi successfully, the device maintains low power standby. it will be waked up according to your PIR sensitivity setting. Someone is in the range ot effective visual angle ot equipment activities,the PIR alarm push the alarm information to the app,and you can push the alarm informatton through the app. If there is a SD Card in the device,video will be recordered.
3. Wake-up remotery
When the device in sleep status, you can open the app on your phone, press the main screen to wake-up the device remotely,then you can view the real-time scene. Also there are voice intercom,image capture,local video and other operations.
1. Enter the real-time monitoring interface→stretch the timeline below the image→ choose time periods PIR during which alerts were triggered.The timeline in blue mark represents a video file.
2. Click the file button at the top right of the video→select Start Time→Search the recorders in 7 days.
4. Distance network video
After the device is configured with WiFi,even if there is no network,the PIR alarm function and video function still can work normally,but the APP won't receive messages from the camera.In no network environment. PlR alarm is triggered after the video can be connected to the network. Archive can be viewed and played back.
Remote view through APP at anytime anywhere.
Multi-User can view at the same time
APP Wake Up PIR Human Induction Wake Up
Sleep Status: No human activity, the camera does not consume battery power when it goes to sleep, but it does not affect the normal monitoring of the camera.
PIR Alarm: Support the PIR human body infrared detection.When someone lingers in the doorway, immediately send alarm information to the smartphone APP.
Warm tips: Before seup the camera, please press the "reset button" with 5- 7 seconds to factory reset.
For using our product quickly and normally,please follow the following warm tips:
1. First time use, please turn on the camera back cover, and the camera switch machine key, restore factory key, TF card slot and USB charging interface, all in the bottom ofthe machine. After the product configures successfully, please install the rear cover, and accessories with the screws to fixed the rear cover;
2. New products for factory defaults, the device need to recharge when lack of energy. Please use 5V 2A power supply to the equipment when charging; Please do not use 9v/5v adaptive power or flash,fast charging source, otherwise it will burn equipment circuit, resulting in damage to equipment, and it will not within the warranty areas;
3. Device configuration is successful, please open PIR Alarm, and follow the following angle to install or place, can make PIR alarm in the most reasonable angle:
3/1, the camera flat put use, please place at I .4 meters--1.8 meters height, is no barrier in front;
3/2, the camera wall installed use, installation height, 2.5 meters-3.2 meters, the use of stents,fixed a good camera, keep the camera downward tilt 15 degree - 20 degree;
3/3, in the above angle range, PIR alarm induction distance of about 6-8 meters.
*if for AP mode, Battery consumption is faster
more about AP mode operation, please contact us
Camera is unable to connect to WiFi network.
A1 : Camera is only available to 2.4G router instead of 5G router.
A2 : Please do not set hide functionality on your WiFi router,or the device will not successfully configure home WiFi
A3 : Please check whether the WiFi router runs normally or not,then confirm the DHCP router.
A4 : Please try to reset the WiFi router before configuring the device to get a better network environment.
A5 : Please follow the instructions carefully,configure your home wireless network, and don't skip any one of these steps,or it may cause the device connection failure.
1,How far is the device's PIR infrared sensor alarm?
PIR infrared,the distance and range will has different under different temperature, the distance of PIR work is within 5M.
2,The device has inserted SD card,and record video function is turn on,why still can not find video file after triggering alarm?
In the first time use SD card,you need format the SD card before the normal reading and writing.
3,What's the temperature can be normal use of the device?
Suggest temperature is -10—50degree